You are here: Audio > Accessible Toilet Alarms > Emergency call point, button reset, with remote socket, can make std and emcy calls
C-TEC - NC802DEB-1/2
Emergency call point, button reset, with remote socket, can make std and emcy calls
List Price
£67.88
$0.00
€0.00
incl. VAT
Product Description
The NC802DEB-1/2 is a button-operated call/reset point capable of generating Standard and Emergency calls on an 800 Series Call System. It includes a 6.35mm jack plug socket where you can connect an optional tail call lead, pressure mat or other ancillary calling device. When the red LED lights up this confirms a call has been made. If the onboard reset button is pressed this cancels Standard and Emergency calls made from the NC802DEB-1/2 and Standard calls made from other devices wired on the same zone (such as ceiling pull units in En-suite areas).
Specification Sheet
| Description | NC802DEB-1/2 |
|---|---|
| Quiescent current | 0mA (none) |
| Alarm current | Determined by the type of control equipment and number / type of field devices connected to the system |
| Indicators | Red Reassurance LED (lit constant for Standard calls, intermittently for Emergency calls) |
| Controls | Call button (generates Standard calls); Alert button (generates Emergency calls); Reset button (cancels Standard or Emergency calls from the NC802DEB-1/2 and Standard calls from devices wired on the same Zone) |
| Connections | SIG (Signal); -Ve (Negative); +Ve (Positive) |
| Onboard 6.35mm Remote Jack Socket | Yes. For optional tail call leads, floor pressure mats, air switches etc |
| Onboard Infrared Receiver | No |
| Dimensions | 87 W x 87 H x 32 D mm |
| Construction & finish | Plastic |
| IP Rating | IP20 |
| Operating temperature | -5ºC to +40ºC. Max. relative humidity 95% non-condensing |
| Weight (Gross) | 0.06kg |
