CIE-Group | Access Control and Audio Visual Technology Suppliers

Part Number: CLB50-2SC-SC-DU-CE

Conec2 - Fiber 2 x SC SC Duplex Coupler

The CLB50-2SC-SC-DU-CE is a 50mm snap-in Conec2 Module featuring 2 x Fiber SC Connectors to both front and rear for duplex coupling of fiber cables.

The CLB50-2SC-SC-DU-CE is a 50mm snap-in Conec2 Module featuring 2 x Fiber SC Connectors to both front and rear for duplex coupling of fiber cables. Simply snaps into place in any of the Conec2 5...

more details

Part Number: CLB45-XLR

Conec2 - Female 3 Pin XLR to screw terminal - 45mm Conec2 Module

The Conec2 CLB45-XLR is a 45mm snap in AV Module featuring a 3 pin XLR female connector to the front and screw terminals to the rear.

The Conec2 CLB45-XLR is a 45mm snap in AV Module featuring a 3 pin XLR female connector to the front and screw terminals to the rear. Simply snaps into place in the Conec2 (45mm) Faceplate range....

more details

Part Number: CLB45-PHJ-11

Conec2 - 3.5mm Jack to Jack - 45mm Conec2 Module

The Conec2 CLB45-PHJ-11 is a 45x22.5mm AV Faceplate Module featuring 1 x 3.5mm Jack Input Socket to the front and rear of the Module for simple, fast, feed-through audio signal connectivinty.

The Conec2 CLB45-PHJ-11 is a 45x22.5mm AV Faceplate Module featuring 1 x 3.5mm Jack Input Socket to the front and rear of the Module for simple, fast, feed-through audio signal connectivinty. Simp...

more details

Part Number: CLB-BLUETOOTH

Conec2 - Conec2 Bluetooth 50x25mm Module for CLB-AVID

CLB-Bluetooth Conec2 Bluetooth Receiver Module for use in conjunction with CLB-AVID Amplifier Module

The CLB-BLUETOOTH is a Bluetooth Module for use exclusively in conjunction with the CLB-AVID Faceplate Module Stereo Amplifier. This Bluetooth Receiver Module is part of the Conec2 50mm Module...

more details

Part Number: CLB45DP-270A

Conec2 - Conec2 AV Desk Riser Pod housing 12 x (45x25mm) modules

The new Conec2 AV Desk Riser Pod from Clever Little Box provides a simple, effective pop-up AV connectivity solution which can be flush-mounted into a desk, table or cupboard, etc.

The new Conec2 AV Desk Riser Pod from Clever Little Box provides a simple, effective pop-up AV connectivity solution which can be flush-mounted into a desk, table or cupboard, etc. These retracta...

more details

Part Number: CLB50-4K-C3

Conec2 - 1 x Voice Module with RJ11 Connector - 50mm Conec2 Module

The Conec2 CLB50-4K-C3 is a 50mm Snap-in Module featuring 1 x Voice RJ11 Connector on the front of the Module.

The Conec2 CLB50-4K-C3 is a 50mm Snap-in Module featuring 1 x Voice RJ11 Connector on the front of the Module. Simply snaps into place in any of the Conec2 (50mm) Faceplate ‘Blank Shell’ rang...

more details

Part Number: CLB45-USB-AF/AF-180

Conec2 - USB A to USB A narrow depth - 45mm Conec2 Module

The Conec2 CLB50-USB-AF/AF-180 is a 45mm x 22.5mm AV Faceplate Module featuring USB A input to the front, plus USB A Input to the rear rotated at 90 degrees to provide a reduced Module and cable depth when connecting at the rear.

The Conec2 CLB50-USB-AF/AF-180 is a 45mm x 22.5mm AV Faceplate Module featuring USB A input to the front, plus USB A Input to the rear rotated at 90 degrees to provide a reduced Module and cable de...

more details

Part Number: CLB2550HDMI

Conec2 - Conec2 Multimedia Wallplate - 1 x HDMI Input + 45x45mm Aperture

Conec2 Single-gang Faceplate with fixed HDMI Input Connector, plus 45x45mm Aperture for additional AV Modules

The CLB2550HDMI is a single-gang Multimedia Audio Visual Wallplate which combines fixed HDMI Input Connector, together with a 45mm x 45mm aperture to add your choice of Conec2 45mm AV modules....

more details

Part Number: CLB50-SVGA15-F/M-20CM

Conec2 - HDB-15 SVGA 15 Female to Male - 50mm Conec2 Module

The Conec2 CLB50-SVGA-F/M-20CM is a 50mm x 25mm AV Faceplate Module featuring 15 pin SVGA Input to the front and SVGA male connector on a pre-wired 170mm cable to the rear.

The Conec2 CLB50-SVGA-F/M-20CM is a 50mm x 25mm AV Faceplate Module featuring 15 pin SVGA Input to the front and SVGA male connector on a pre-wired 170mm cable to the rear. Simply snaps into plac...

more details

Part Number: CLB45-48K-C5E

Conec2 - 4 x Lan Port Module to LSA terminal block, Cat5E - 45mm Conec2 Module

Conec2 45x45mm Module featuring 4 x Cat5e LAN Input Sockets and Krone connectors to the rear.

The Conec2 CLB45-48K-C5E is a 45x45mm Snap-in AV Faceplate Module featuring 4 x RJ45 Cat5e Inputs Sockets of multiple network / data connection. The CLB4548KC5E Module features Krone-type connect...

more details

Part Number: CLB50-PHJ-F/F-20CM

Conec2 - 3.5mm Stereo Jack Female to Female - 50mm Conec2 Module

50mm x 25mm Conec2 Module featuring 3.5mm Jack Socket to the front, 3.5mm Jack Socket on 180mm pre-wired cable to the rear.

The Conec2 CLB50-PHJ-F/F-20CM is a 25mm x 50mm AV Faceplate Module featuring standard 3.5mm Jack Socket to the front and 3.5mm Jack Socket on a 180mm pre-wired cable to the rear. Simply snaps int...

more details

Part Number: CLB50-88K-C5E-PA

Conec2 - 1 in 2 out- CAT 5e Splitter into IDC K Block - 50mm Conec2 Module

The Conec2 CLB50-88K-C5E-PA is a 50mm Snap-in Module featuring 2 x CAT5e RJ45 Connectors on the front of the module and Krone IDC Block to the rear. This provides a 1 in, 2 out CAT5e Splitter module.

The Conec2 CLB50-88K-C5E-PA is a 50mm Snap-in Module featuring 2 x CAT5e RJ45 Connectors on the front of the module and Krone IDC Block to the rear. This provides a 1 in, 2 out CAT5e Splitter modul...

more details

Part Number: CLB45-3RCA-AV

Conec2 - 3 x Phono to Screw Terminals - 45mm Conec2 Module

The Conec2 CLB45-3RCA-AV is a 45mm Snap-in Module featuring 3 x RCA Phono Connectors on the front of the module and screw terminals to the rear.

The Conec2 CLB45-3RCA-AV is a 45mm Snap-in Module featuring 3 x RCA Phono Connectors on the front of the module and screw terminals to the rear. Simply snaps into place in any of the Conec2 45mm...

more details

Part Number: CLB50-88-C5E-PA

Conec2 - 1 in 2 out - CAT 5e RJ45 Splitter into RJ45 Jack - 50mm Conec2 Module

The Conec2 CLB50-88-C5E-PA is a 50mm Snap-in Module featuring 2 x CAT5e RJ45 Connectors on the front of the module and 1 x CAT5e RJ45 Connector to the rear. This provides a 1 in, 2 out CAT5e Splitter module.

The Conec2 CLB50-88-C5E-PA is a 50mm Snap-in Module featuring 2 x CAT5e RJ45 Connectors on the front of the module and 1 x CAT5e RJ45 Connector to the rear. This provides a 1 in, 2 out CAT5e Splitt...

more details

Part Number: CLB50-USBA/MINI-90F/F

Conec2 - USB (A) to mini USB (A) Coupler - 50mm Conec2 Module

The Conec2 CLB50-USBA/MINI-90F/F is a 50mm USB Coupler Snap-in Module featuring USB (A) connector on the front of the module and Mini USB (A) fitted at 90 degree angle to the rear.

The Conec2 CLB50-USBA/MINI-90F/F is a 50mm USB Coupler Snap-in Module featuring USB (A) connector on the front of the module and Mini USB (A) fitted at 90 degree angle to the rear. Simply snaps in...

more details

Part Number: CLB45-BB

Conec2 - Banana Socket to Banana Socket Coupler - 45mm Conec2 Module

The Conec2 CLB45-BB is a 45mm Banana Socket Coupler Snap-in Module featuring 2 x Banana Socket on the front and rear of the module.

The Conec2 CLB45-BB is a 45mm Banana Socket Coupler Snap-in Module featuring 2 x Banana Socket on the front and rear of the module. Simply snaps into place in any of the Conec2 45mm Faceplate ‘B...

more details

Part Number: CLB45-HO-3

Conec2 - BNC Cut-out Blank - 45mm Conec2 Module

The Conec2 CLB45-HO-3 is a 45mm Snap-in Blank Filler Module with BNC Cut-out hole.

The Conec2 CLB45-HO-3 is a 45mm Snap-in Blank Filler Module with BNC Cut-out hole. Simply snaps into place in any of the Conec2 45mm Faceplate ‘Blank Shell’ range and AV Desk Riser Pods. U...

more details

Part Number: CLB45-USB-BF/AF-180

Conec2 - USB B to USB A narrow depth - 45mm Conec2 Module

The Conec2 CLB50-USB-BF/AF-180 is a 45mm x 22.5mm AV Faceplate Module featuring USB B input to the front, plus USB A Input to the rear rotated at 90 degrees to provide a reduced Module and cable depth when connecting at the rear.

The Conec2 CLB50-USB-BF/AF-180 is a 45mm x 22.5mm AV Faceplate Module featuring USB B input to the front, plus USB A Input to the rear rotated at 90 degrees to provide a reduced Module and cable de...

more details

Part Number: CLB50-480-40MP

Conec2 - 50x25mm Blank Plate with 10mm Hole Cut-Out - Conec2 50mm

Conec2 50mm Snap-in Blank Plate Module featuring 10mm cut-out for RCA and 1/4" jack sockets

The CLB50-480-40MP is a 50mm Snap-in Blank Filler Module with 1 x 10mm round cut-out to accept either RCA or ¼” jack socket. Simply snaps into place in any of the Conec2 (50mm) Faceplate ‘Bl...

more details

Part Number: CLB45-HO-2

Conec2 - Phono Cut-out Blank - 45mm Conec2 Module

The Conec2 CLB45-HO-2 is a 45mm Snap-in Blank Filler Module with 1 x Phono Socket Cut-out hole.

The Conec2 CLB45-HO-2 is a 45mm Snap-in Blank Filler Module with 1 x Phono Socket Cut-out hole. Simply snaps into place in any of the Conec2 45mm Faceplate ‘Blank Shell’ range and AV Desk Rise...

more details

Conec2 - All Products