Conec2 - All Products
| Compare up to 4 items: | 1 | 2 | 3 | 4 | Compare |
Part Number: CLB50-3RCA-CP
Conec2 - 3 x Phono RCA Connector input to Component Video out (50mm)
The Conec2 CLB50-3RCA-CP is a 50mm Snap-in AV Module featuring 3 x RCA connectors (Red / Blue / Green) on the front of the module and Component Video via screw terminals to the rear.
The Conec2 CLB50-3RCA-CP is a 50mm Snap-in AV Module featuring 3 x RCA connectors (Red / Blue / Green) on the front of the module and Component Video via screw terminals to the rear.
Simply snaps...
Part Number: CLB50-LC-4-SCT
Conec2 - Fiber 4 x LC Coupler - 50mm Conec2 Module
The CLB50-LC-4-SCT is a 50mm snap-in Conec2 Module featuring 4 x Fiber LC Connectors to both front and rear for coupling of fiber cables.
The CLB50-LC-4-SCT is a 50mm snap-in Conec2 Module featuring 4 x Fiber LC Connectors to both front and rear for coupling of fiber cables.
Simply snaps into place in any of the Conec2 50mm Facepla...
Part Number: CLB2550VA
Conec2 - Conec2 Multimedia Wallplate - 1 x VGA and 3.5mInput + 45x45mm Aperture
Conec2 Single-gang Wallplate with fixed VGA and 3.5mm Connectors, plus 45x45mm Aperture for additional AV Modules
The CLB2550VA is a single-gang Multimedia Audio Visual Wallplate which combines fixed VGA female and 3.5mm jack sockets, together with a 45mm x 45mm aperture to add your choice of Conec2 45mm AV mo...
Part Number: CLB50-HO-1
Conec2 - 3.5mm Cut-out 50 x 25 Blank - 50mm Conec2 Module
The Conec2 CLB50-HO-1 is a 50mm Snap-in Blank Filler Module with 3.5mm Jack Socket Cut-out hole.
The Conec2 CLB50-HO-1 is a 50mm Snap-in Blank Filler Module with 3.5mm Jack Socket Cut-out hole.
Simply snaps into place in any of the Conec2 (50mm) Faceplate ‘Blank Shell’ range.
Use with...
Part Number: CLB45-84K-C5E
Conec2 - 1 x Data, 1 x Voice to Krone IDC Block - 45mm Conec2 Module
The Conec2 CLB45-84K-C5E is a 45mm Snap-in Module featuring 1 x Data and 1 x Voice RJ Connector on the front of the Module and Krone IDC Block to the rear.
The Conec2 CLB45-84K-C5E is a 45mm Snap-in Module featuring 1 x Data and 1 x Voice RJ Connector on the front of the Module and Krone IDC Block to the rear.
Simply snaps into place in any of the Co...
Part Number: CLB45-RF
Conec2 - F Connector to Screw Terminal - 45mm Conec2 Module
The Conec2 CLB45-RF is a 45mm Snap-in Module featuring RF Coaxial connector on the front and rear of the module.
The Conec2 CLB45-RF is a 45mm Snap-in Module featuring RF Coaxial connector on the front and rear of the module.
Simply snaps into place in any of the Conec2 45mm Faceplate ‘Blank Shell’ rang...
Part Number: CLB45-PHJ-21
Conec2 - 3.5mm Jack combiner, 2 in 1 out, Jack to Jack - 45mm Conec2 Module
Conec2 45x22.5mm Module featuring 3.5mm Audio Jack 2 to 1 Combiner, 2 Female Sockets to the front of the Module, 1 to the rear
The Conec2 CLB45-PHJ-21 is a 45x22.5mm AV Faceplate Module featuring 2 x 3.5mm Jack Input Sockets to the front of the Module, which combine to 1 x 3.5mm Jack Socket output to the rear.
Therefore,...
Part Number: CLB50-SV+PHJ
Conec2 - S-Video and 3.5mm Stereo Audio Module (nickle plated)
The Conec2 CLB50-SV+PHJ is a 50mm Snap-in Module featuring S-Video Connector and 3.5mm Stereo Audio Connector to the front of the Module and screw terminals to the rear.
The Conec2 CLB50-SV+PHJ is a 50mm Snap-in Module featuring S-Video Connector and 3.5mm Stereo Audio Connector to the front of the Module and screw terminals to the rear.
Simply snaps into place in...
Part Number: CLB45SB-135
Conec2 - Aluminium Triple Gang Wall Plate, 6 x (45x25mm) Modules
The Conec2 CLB45SB-135 is a Triple Gang Blank Faceplate Shell designed to accept 6 x 45mm Conec2 AV Connectivity Modules.
The Conec2 CLB45SB-135 is a Triple Gang Blank Faceplate ‘Shell’ designed to accept 6 x 45mm Conec2 AV Connectivity Modules.
Manufactured in high quality, hard-wearing ABS plastic and aluminiu...
Part Number: CLB45-BS01
Conec2 - Switch - 45mm Conec2 Module
Conec2 45x45mm Module featuring large black On/Off (0/1)Rocker Switch
The Conec2 CLB45-BS01 is a 45x45mm AV Faceplate Module featuring large, black On/Off (0/1) Rocker Switch. Also features finger guards to the left and right of the switch.
This is a double pole swi...
Part Number: CLB50-PHJ-F/M-20CM
Conec2 - 3.5mm Stereo Jack Female to Male - 50mm Conec2 Module
50mm x 25mm Conec2 Module featuring 3.5mm Jack Socket to the front, 3.5mm Jack Plug on 180mm pre-wired cable to the rear.
The Conec2 CLB50-PHJ-F/M-20CM is a 25mm x 50mm AV Faceplate Module featuring standard 3.5mm Jack Socket to the front and 3.5mm Jack Plug on a 180mm pre-wired cable to the rear.
Simply snaps into...
Part Number: CLB50-HO-3RCA
Conec2 - 3 x Phono Cut-Out 50 x 25 Blank - 50mm Conec2 Module
The Conec2 CLB50-HO-3RCA is a 50mm Snap-in Blank Filler Module with 3 x RCA Socket Cut-out holes.
The Conec2 CLB50-HO-3RCA is a 50mm Snap-in Blank Filler Module with 3 x RCA Socket Cut-out holes.
Simply snaps into place in any of the Conec2 (50mm) Faceplate ‘Blank Shell’ range.
Use wit...
Part Number: CLB45-PHJ-12
Conec2 - 3.5mm Jack splitter, 1 in 2 out, Jack to Jack - 45mm Conec2 Module
Conec2 45x22.5mm Module featuring 3.5mm Audio Jack 1 to 2 Splitter, 1 Female Socket to the front of the Module, 2 to the rear
The Conec2 CLB45-PHJ-12 is a 45x22.5mm AV Faceplate Module featuring 1 x 3.5mm Jack Input Socket to the front of the Module, which splits to 2 x 3.5mm Jack outputs to the rear.
Therefore, a singl...
Part Number: CLB50-88K-C3
Conec2 - 1 in 2 out CAT 5e Splitter from Krone IDC Block - 50mm Conec2 Module
The Conec2 CLB50-88K-C3 is a 50mm Snap-in Module featuring 2 x CAT6e RJ45 Connectors on the front of the Module and Krone IDC Block to the rear.
The Conec2 CLB50-88K-C3 is a 50mm Snap-in Module featuring 2 x CAT5e RJ45 Connectors on the front of the Module and Krone IDC Block to the rear.
Simply snaps into place in any of the Conec2 50m...
Part Number: CLB45-4K-C3
Conec2 - 1 x Voice Module with RJ11 Connector - 45mm Conec2 Module
The Conec2 CLB45-4K-C3 is a 45mm Snap-in Module featuring 1 x Voice RJ11 Connector on the front of the Module.
The Conec2 CLB45-4K-C3 is a 45mm Snap-in Module featuring 1 x Voice RJ11 Connector on the front of the Module.
Simply snaps into place in any of the Conec2 45mm Faceplate ‘Blank Shell’ rang...
Part Number: CLB45SB-180
Conec2 - Aluminium Quad Gang Wall Plate, 8 x (45x25mm) Modules
The Conec2 CLB45SB-180 is a Quad Gang Blank Faceplate Shell designed to accept 8 x 45mm Conec2 AV Connectivity Modules.
The Conec2 CLB45SB-180 is a Quad Gang Blank Faceplate ‘Shell’ designed to accept 8 x 45mm Conec2 AV Connectivity Modules.
Manufactured in high quality, hard-wearing ABS plastic and aluminium,...
Part Number: CLB45-SP
Conec2 - 2 x Speaker Coupler L-R - 45mm Conec2 Module
The Conec2 CLB45-SP is a 45mm Snap-in Module featuring 2 x Loudspeaker Coupler Binding Posts.
The Conec2 CLB45-SP is a 45mm Snap-in Module featuring 2 x Loudspeaker Coupler Binding Posts.
Simply snaps into place in any of the Conec2 45mm Faceplate ‘Blank Shell’ range and AV Desk Riser...
Part Number: CLB45-BS01L
Conec2 - Illuminated Red Power Switch - 45mm Conec2 Module
Conec2 45x45mm Module featuring large Illuminated Red On/Off (0/1) Rocker Switch
The Conec2 CLB45-BS01 is a 45x45mm AV Faceplate Module featuring large, illuminated Red On/Off (0/1) Rocker Switch. Also features finger guards to the left and right of the switch.
This is a doub...
Part Number: CLB50-100BT
Conec2 - 100 Base T Splitter RJ45 (Y Adapter Module)
The Conec2 CLB50-100BT is a 50mm Snap-in AV Module featuring 100BaseT Splitter via 2 x RJ45 connectors on the front of the module and 1 x RJ45 connectors to the rear.
The Conec2 CLB50-100BT is a 50mm Snap-in AV Module featuring 100BaseT Splitter via 2 x RJ45 connectors on the front of the module and 1 x RJ45 connectors to the rear.
Simply snaps into place in...
Part Number: CLB50-SV+2RCA
Conec2 - S-Video and RCA Stereo Audio Module (nickle plated)
The Conec2 CLB50-SV+2RCA is a 50mm Snap-in Module featuring 1 x S-Video and 2 x RCA Phono Connectors on the front of the module and screw terminals to the rear.
The Conec2 CLB50-SV+2RCA is a 50mm Snap-in Module featuring 1 x S-Video and 2 x RCA Phono Connectors on the front of the module and screw terminals to the rear.
Simply snaps into place in any of t...
