You are here: Audio Visual > Amplifiers > Low Z Multi-Channel Amplifiers > 8 x 300W 4ohm Digital Power Amplifier
Recently Viewed
Inter-M - DSA300E
8 x 300W 4ohm Digital Power Amplifier
List Price
£936.00
$1,411.59
€1,145.82
incl. VAT
Product Description
The DSA300E Low Impedance Power Amplifier with variable 8x 300W channel @ 4Ω, 8x 150W channel @ 8Ω or at high output, 4x 600W channel @ 8Ω when in Bridge mode. This flexibility renders the DSA300E suitable for several high quality BGM applications ranging from hotels and restaurants to conference centres.
.jpg)
The Inter-M DSA300E Amplifier is only 2U high rack system designed to use low heat and is lightweight at under 8kg in comparison to previous 8x channel analogue amplifier models.
Simultaneous Outputs
The DSA300E can send up to 8 different sound sources to 8 outputs simultaneously.
Example: The DSA300E can send sound sources from a CD player to outputs in an exhibition hall A and broadcast microphone to hall B. Excellent for use in applications from a small sized venue like a cafe or retail store to large sized venues like a department store or exhibition/museum.
Maximum of 600W Output Channels in Bridge Mode
The DSA300E Bridge mode enables 2x 300W outputs to switch to 1x 600W output. The 'Mode Switch' must be changed to 'Bridge Mode' on the back of the panel and will be indicated as 'on' by an LED light on the front panel. When all channels are in Bridge mode, there are 4x 600W at 8Ω available outputs; these must be bridged in their designated odd to even pairs to work, eg channel 1 and 2 as one output, channels 3 and 4 as another output, etc..
High-quality Sound - High S/N & Low THD
The DSA300E amplifier's high quality performance is due to Signal to Noise value (S/N) is over 100dB whilst the Total Harmonics Distortion (THD) is below 0.1%. This technical combination is ideal for applications such as restaurants, hotels and conference centres where high quality background music is required.
.jpg)
LED Indicators
When Bridge mode is enabled on the rear of the amplifier, an LED lights up on the front panel to indicate it is in 600W use and advises which output to use. There is also a backlit LED for AC/DC supply as well as separate volume control LED's as separate volume control is available.
.jpg)
Specification Sheet
- Click to download: dsa300e_spec_.pdf
- High performance 8 channel class-D power amplifier: High performance Class-D Professional Amplifier has up to 2400W (300W×8ch) power output
- SMPS (Switching Mode Power Supply) power scheme: High efficient, light weight SMPS power system is utilized
- Powerful and detailed sound quality: High S/N ratio and Low THD reproduces powerful and detailed sound
- Complete protection circuits: Complete circuit protection is activated in case of amplifier overheating, output shorting, overload, over power and DC output
- Operation indicator led: LED display to check the operating status (ACT, STBY, POWER, SIG, CLIP, PROT, BRIDGED)
- Balanced input: This connection is used to ensure the lowest noise operation which eliminates the common noisefrom the cable
- Stereo/Bridged mode select: There is STEREO MODE that outputs input signals of each channel independently. The BRIDGED MODE binds CH1 and CH2 as one which enables bigger output than done in STEREO MODE
| Description | DSA300E |
|---|---|
| Rated Output Power | 8Ω per channel (STEREO): 150W, 4Ω per channel (STEREO): 300W, 8Ω per channel (BRIDGED): 600W |
| Input Sensitivity | 1.23Vrms (4dBu) |
| Voltage Gain (STEREO) | 29dB |
| Voltage Gain (BRIDGED) | 35dB |
| THD (AES17, 1/3 rated output power) | Less than 0.3% (20kHz LPF) |
| S/N (20kHz LPF) | More than 100dB (20kHz LPF) |
| Frequency Response (1W, ±3dB) | 20Hz ~ 20kHz |
| Output Circuit | Class D |
| Input Impedance | 10kΩ Balanced |
| Indicator | SIG, CLIP, PROT, BRIDGED |
| Protection Circuit | Full Short Circuit, Thermal Protection Power ON/OFF Muting, DC Output Protection |
| Input Terminal | XLR Female |
| Output Terminal | 4 Pole Speaker Socket |
| Operating Temperature | -10℃ ~ +40℃/0% ~ 90% |
| Power Source | 220-240v AC, 50/60Hz |
| Dimensions (Set) | 482(W) x 88(H) x 367(D)mm |
| Weight (Net) | 7.70kg |
| Weight (Gross) | 7.70kg |
