You are here: Audio > Audio over IP > Dante Transmission > 4 Way Audio and Control via Ethernet Cable, Dante Protocol
Clockaudio - CDT-100
4 Way Audio and Control via Ethernet Cable, Dante Protocol
List Price
£0.00
$0.00
€0.00
incl. VAT
Product Description
The CDT-100 4-way Audio and Control unit by Clockaudio uses ethernet, Dante protocol, to achieve an advanced professional hardware platform to successfully carry audio signals and control functions of up to 24 microphones and 24 control devices via one single Cat5e network cable.
Sample Layout Schematic:
Click to enlarge
The CDT-100 features several connection ports 4x Mic inputs with switchable phantom power which connects swiftly through phoenix block connectors, 4x logic ports to connect to any Clockaudio control devices, 1x RJ12 port for ARM controler input. Aside from the connectors, 6x CDT-100 units can be daisy-chained for additional control, all powered/phantom powered and LED illuminated by only one unit's 12v DC power supply.
• Conference rooms
• Board rooms
• Video conference rooms
Any application where multiple microphones/copntrol devices are connected via AV equipment.
Specification Sheet
- Click to download: cdt100_spec.pdf
Manual
- Click to download: cdt100_manl.pdf
- Easy to install with under table mounting
- Audio and control signals transported over Dante
- 4 audio inputs, multiple units may be daisy chained (maximum of 6 units on a single CAT-5)
- Provides Phantom Power for each mic input
- 4 RJ45 Touch Switch ports compatible with all logic enabled Clockaudio devices: direct connection to CH32, TS001, TS003, TS005, CRM202S-RF, CRM203S-RF, CS-S Series, SM80S, S80S & SWP-2 / ARM-C controller & CCRM4000 Retractable Microphone
- Open API for interfacing with Control Systems
- Compatible with all Dante enabled DSPs and most logic control systems
- Power Supply for the CDT-100 is sold seperatly
- AES67 Compatible (See our compatibility chart for details)
| Description | CDT-100 |
|---|---|
| Input Type | Balanced and RF Filtered |
| Gain | 0dB |
| Input Impedance | >1.8K ohms |
| Phantom Power | +48V, software selectable |
| EIN | -115dBu |
| System THD+N | Less than 0.01% at any gain, input signal 3dB below maximum |
| Physical Level | Standard Ethernet |
| Connector | Single RJ-45 |
| Cable Quality | CAT-5 |
| Transmission Speed | 100 Mbps |
| Dimensions | 38(H) x 211(W) x 120(D) mm |
| Weight (Net) | 0.79kg |
| Weight (Gross) | 0.76kg |
