PUV-1630TTX - 2 x HDMI, 1 x VGA over Single CAT5e/6/7 HDBaseT Table-Top Transmitter (Single LAN & PoH up to 100m)
Click on images to enlarge
PUV-1630TTX - 2 x HDMI, 1 x VGA over Single CAT5e/6/7 HDBaseT Table-Top Transmitter (Single LAN & PoH up to 100m)
PUV-1630TTX - 2 x HDMI, 1 x VGA over Single CAT5e/6/7 HDBaseT Table-Top Transmitter (Single LAN & PoH up to 100m)
PUV-1630TTX - 2 x HDMI, 1 x VGA over Single CAT5e/6/7 HDBaseT Table-Top Transmitter (Single LAN & PoH up to 100m)
PUV-1630TTX - 2 x HDMI, 1 x VGA over Single CAT5e/6/7 HDBaseT Table-Top Transmitter (Single LAN & PoH up to 100m)
PUV-1630TTX - 2 x HDMI, 1 x VGA over Single CAT5e/6/7 HDBaseT Table-Top Transmitter (Single LAN & PoH up to 100m)
Recently Viewed
CYP - PUV-1630TTX

2 x HDMI, 1 x VGA over Single CAT5e/6/7 HDBaseT Table-Top Transmitter (Single LAN & PoH up to 100m)

HDBaseT
HDMI - High Definition Multimedia Interface
PoE
RS232 Connectivity
VGA

Product Description

​The PUV-1630TTX 2x HDMI & 1x VGA HDBaseT Table-top Transmitter is a versatile, portable solution to AV presentations and connectivity on the go.

CYP developed this HDBaseT Transmitter & Switcher, the PUV-1630TTX, where no pre-installation is necessary, to allow fast, simple connectivity and transmission of multiple AV devices over HDBaseT.

The PUV-1630TTX is adaptable and easy to use, with 2x HDMI, 1x VGA signal inputs over a single Cat5e/6/7 cable which additionally serves for embedding analogue audio and LAN over the same Cat cable. All of which allows uncompressed signals to be transmitted up to a distance of 100m to a compatible receiver from the PUV-1600 range.

Included is an easy-to-use software which will allow the user to set timing delays on the screen used when unplugging and plugging back in devices between presentations. This would allow the screen never to go blank whilst awaiting the next user to plug in, making for a much smoother and professional presentation.

Any connected device to the PUV-1630TTX Desktop Transmitter may be controlled through the Consumer Electronics Control (CEC). Once connected, the correct HDMI or VGA input channel can then be selected via the WebGUI or remote control to the display unit.

The hot plug detection enables automatic input detection for hands-free control and the push buttons on the front of the unit allows for ease of use.

The PUV-1630TTX has a HDBaseT bandwidth limit of 10.2Gbps but will automatically convert any higher bandwidths, such as HDMI 4KUHD, to be compatible with the system.

The PUV-1630TTX is powered by the PoH of the connected receiver from the PUV-1600 range.

Manual

  • Supplied complete with the CMD 'Contour' unit, and C Clamp for table-top fixing
  • HDBaseT: High-Definition video and audio, 100BaseT Ethernet, PoH (Power over HDBaseT)
  • HDMI 2.0 and DVI 1.0 compatible
  • HDCP 2.2 Compliant
  • 2 x HDMI Input
  • 1 x VGA Input with 3.5mm mini-jack analogue audio input
  • Automatic conversion of 4K @ 50/60Hz HDMI sources to 4K@30Hz (4:4:4 8-Bit) for transmission over HDBaseT
  • Supports VGA input resolutions up to WUXGA (RGB)
  • PoH (Power over HDBaseT) support
  • Auto Switching & CEC Control
  • Front panel push button control & front panel LEDs to indicate input selection, link status and power
Description PUV-1630TTX
Inputs 2x HDMI (2x HDMI Uncompressed AV and Data) / 1x 15pin Dsub (1x VGA RGBHV) / 1x 3.5mm Stereo mini-jack (1x Analogue audio Stereo(L/R)), 1x RJ45 (1x LAN Serving)
Outputs 1x RJ45 (1x HDBaseT HDMI & Propriety Data)
POE PSU PoH
Dimensions 130(W) x 50(D) x 45(H) mm
Weight (Net) 0.23kg
Weight (Gross) 0.38kg
Accreditations
  • UVDB Registered
  • PLASA Member
  • Member of BESA
  • BSI 9001
  • ISCE supporting member