You are here: Intercom | Access Control > IP Door Intercoms > Intercom Accessories > 2N SIP Mic Organic
2N - 914431E
2N SIP Mic Organic
List Price
£1,300.70
$1,382.00
€1,121.79
incl. VAT
Product Description
The 914431E SIP based microphone console for paging can appeal not only by wooden designer case, but also by various advanced functions such as broadcasting to 12 zones, two-way communication thanks to an inbuilt speaker, or playing back pre-recorded messages. All these functions are available without the need of server or distance limitations.
The 2N SIP Mic may be used in:
2N SIP Mic uses a multicast technology and sophisticated controlling mechanism hence enabling communication to up to 12 zones. Moreover, the microphone console- speaker connection is straight forward, no server needed.
Two-way communication
Call from the 2N IP intercoms to the paging console with an inbuilt speaker thanks to SIP protocol.
Pre-recorded announcements
Upload or record a message via the microphone and then play it by simple push of a button to a designated zone. It is an ideal solution for places where similar messages are broadcasted several times a day.
Easy configuration
The zone, priorities and pre-recorded messages are simply configured via the web interface.
Axis Vapix support for paging
Broadcast directly from 2N SIP Mic to compatible Axis Speakers and cameras.
Easy installation with a single cable
The 2N SIP Mic is very easy to install simply by connecting it to an existing IP network with a PoE cable.
Listen-in function
At simple press of a button one can listen to what is happening in certain zone.
Announcements pre-recording
Record your own messages via the software application or using the microphone console itself.
Support for IP PBX (SIP)
The 2N SIP Mic device may function independently or be simply connected to IP PBX.
The 2N SIP Mic may be used in:
- Schools and campuses
- Office buildings
- Health care services
- Sports facilities
2N SIP Mic uses a multicast technology and sophisticated controlling mechanism hence enabling communication to up to 12 zones. Moreover, the microphone console- speaker connection is straight forward, no server needed.
Two-way communication
Call from the 2N IP intercoms to the paging console with an inbuilt speaker thanks to SIP protocol.
Pre-recorded announcements
Upload or record a message via the microphone and then play it by simple push of a button to a designated zone. It is an ideal solution for places where similar messages are broadcasted several times a day.
Easy configuration
The zone, priorities and pre-recorded messages are simply configured via the web interface.
Axis Vapix support for paging
Broadcast directly from 2N SIP Mic to compatible Axis Speakers and cameras.
Easy installation with a single cable
The 2N SIP Mic is very easy to install simply by connecting it to an existing IP network with a PoE cable.
Listen-in function
At simple press of a button one can listen to what is happening in certain zone.
Announcements pre-recording
Record your own messages via the software application or using the microphone console itself.
Support for IP PBX (SIP)
The 2N SIP Mic device may function independently or be simply connected to IP PBX.
- Server-less paging to up to 12 zones
- Two-way communication
- Pre-recorded announcements
| Description | 914431E |
|---|---|
| Audio codecs | G.711u, G.722 |
| Speakers | 2 built-in, stereo, power output 2x1 W |
| Logical inputs | 2, galvanically separated, sensitive to contact or voltage from 5 to 48 V |
| Relay output | 1, galvanically isolated, NO and NC contact, max load 48 V, 1 A |
| Headphone output | 3.5 mm jack, stereo, power output 2x30 mW, min. load impedance of 16 Ohm, DR. 101 dB, THD+N -85 dB |
| Primary microphone input | symmetric, XLR, integrated phantom power supply 24 V, DR 88 dB, THD+N -82 dB |
| Headset microphone input | 3.5 mm jack, integrated power supply for electret microphones, DR 84 dB, THD+N -78 dB |
| Line input | 3.5 mm jack, mono or stereo non-symmetric stereo, DR 93 dB, THD+N -82 dB |
| Power supply | 12 to 32 V, power draw max. 1 A PoE to 802.3af standard |
| Dimensions | 209 x 65 x 143 mm |
| Operating temperature | 0 to +40°C |
| Weight (Net) | 1.60kg |
| Weight (Gross) | 2.10kg |
