9156111CB - IP Base Door Intercom Unit - HD Camera, 1/2 Call Buttons, Card Reader ready
Click on images to enlarge
9156111CB - IP Base Door Intercom Unit - HD Camera, 1/2 Call Buttons, Card Reader ready
9156111CB - IP Base Door Intercom Unit - HD Camera, 1/2 Call Buttons, Card Reader ready
9156111CB - IP Base Door Intercom Unit - HD Camera, 1/2 Call Buttons, Card Reader ready
9156111CB - IP Base Door Intercom Unit - HD Camera, 1/2 Call Buttons, Card Reader ready
9156111CB - IP Base Door Intercom Unit - HD Camera, 1/2 Call Buttons, Card Reader ready
9156111CB - IP Base Door Intercom Unit - HD Camera, 1/2 Call Buttons, Card Reader ready
9156111CB - IP Base Door Intercom Unit - HD Camera, 1/2 Call Buttons, Card Reader ready
Recently Viewed
cie group -
List Price £844.77 incl. VAT
2N - 9156111CB

IP Base Door Intercom Unit - HD Camera, 1/2 Call Buttons, Card Reader ready

I.P Connectivity
IK07 Impact Protection rating
IP65 Rating
PoE
List Price
£844.77
$998.88
€946.20
incl. VAT
Show prices in GBP
Show prices in USD
Show prices in EUR

Product Description

The 9156111CB Base IP Intercom system with HD wide-angle  camera, 1-2 call buttons, Card reader (which may be additionally extended to a choice of either 125kHz and 13.56MHz) and speakers. The sharp HD imagery and excellent audibility in all conditions enables the IP Base to be used in busy environments in retail and offices to homes.

2N IP Base Door Intercom


The IP and IK rating allows for the 2N IP Base to be used externally and teamed with an easy installation/wall-mounting process, the ability to hold 1999 users, calls up to 12 numbers from a single button, can be used for door release function and a flashing button during calls means a versatile product for most environments.

The 2N IP Base Intercom allows for one or two call buttons (amendable for the same product). Additional upgrade modules are available as follows:

9156030 - 125kHz RFID card reader
9156031 - 13.56MHz RFID card reader
9137410E - Installation plate for mounting on uneven surfaces



The 2N IP Base operates on the SIP 2.0 protocol, meaning that it will happily sit on any network with it's own IP address and will interface with any SIP telephony system.

Specification Sheet

  • Compact IP intercom
  • Very easy to install
  • Durable aluminium frame
  • Expandable with a 125 kHz or 13.56 MHz RFID card reader
  • Tamper switch
  • Inputs and outputs for connecting up an electric lock and other equipment
  • Wide-angle HD camera
Description 9156111CB
Signalling Protocol SIP 2.0 (RFC - 3261)
Buttons 1 or 2 (the pack holds transparent plastic buttons for both 1 or 2 button options)
Microphone Built-in microphone
Speaker 2W
Sound Pressure at 1kHz at 1m Distance 78 dB
HD Camera Resolution 1280 x 960
Viewing Angle 135 degrees horizontal to 109 degrees vertical
Audio Stream Codec G 711, G 722
Video stream Codec H.263+, H.263, H.264 only for VoIP calls, MJPEG for http streaming
Interfaces PoE 802.3af LAN connector
RFID Reader RFID card reader 13.56 MHz and 125 kHz, connector for expansion module (RFID reader)
IN1 input terminal Passive/Active mode (-30v to +30v DC) OFF = open contact or UIN > 1.5v ON = closed contact or UIN < 1.5v
Relay Output 30v/1A AC/DC, output NO/NC
Active Switch Qutput 8 ~ 12v DC depending on Power supply (PoE: 10 V; adapter: source voltage minus 2 V), max 400 mA
Input for external power supply 12v/2A DC
Operating temperature -40 to 55 degrees C
Operating relative humidity 10% ~ 95% (non-condensing)
Ingress Protection IP65, IK7
Dimensions 109(W) x 229(H) x 31(D)mm
Weight (Net) 1.00kg
Weight (Gross) 1.30kg
Accreditations
  • UVDB Registered
  • PLASA Member
  • Member of BESA
  • BSI 9001
  • ISCE supporting member