You are here: Door Intercom > IP Door Intercoms > IP Intercom Stations > IP Base Door Intercom Unit - HD Camera, 1/2 Call Buttons, Card Reader ready
2N - 9156111CB
IP Base Door Intercom Unit - HD Camera, 1/2 Call Buttons, Card Reader ready
Login for Pricing
Product Description
The 9156111CB Base IP Intercom system with HD wide-angle camera, 1-2 call buttons, Card reader (which may be additionally extended to a choice of either 125kHz and 13.56MHz) and speakers. The sharp HD imagery and excellent audibility in all conditions enables the IP Base to be used in busy environments in retail and offices to homes.
The IP and IK rating allows for the 2N IP Base to be used externally and teamed with an easy installation/wall-mounting process, the ability to hold 1999 users, calls up to 12 numbers from a single button, can be used for door release function and a flashing button during calls means a versatile product for most environments.
The 2N IP Base Intercom allows for one or two call buttons (amendable for the same product). Additional upgrade modules are available as follows:
9156030 - 125kHz RFID card reader
9156031 - 13.56MHz RFID card reader
9137410E - Installation plate for mounting on uneven surfaces
The IP and IK rating allows for the 2N IP Base to be used externally and teamed with an easy installation/wall-mounting process, the ability to hold 1999 users, calls up to 12 numbers from a single button, can be used for door release function and a flashing button during calls means a versatile product for most environments.
The 2N IP Base Intercom allows for one or two call buttons (amendable for the same product). Additional upgrade modules are available as follows:
9156030 - 125kHz RFID card reader
9156031 - 13.56MHz RFID card reader
9137410E - Installation plate for mounting on uneven surfaces
The 2N IP Base operates on the SIP 2.0 protocol, meaning that it will happily sit on any network with it's own IP address and will interface with any SIP telephony system.
Specification Sheet
- Click to download: helios_ip_base_leaflet.pdf
- Compact IP intercom
- Very easy to install
- Durable aluminium frame
- Expandable with a 125 kHz or 13.56 MHz RFID card reader
- Tamper switch
- Inputs and outputs for connecting up an electric lock and other equipment
- Wide-angle HD camera
| Description | 9156111CB |
|---|---|
| Signalling Protocol | SIP 2.0 (RFC - 3261) |
| Buttons | 1 or 2 (the pack holds transparent plastic buttons for both 1 or 2 button options) |
| Microphone | Built-in microphone |
| Speaker | 2W |
| Sound Pressure at 1kHz at 1m Distance | 78 dB |
| HD Camera Resolution | 1280 x 960 |
| Viewing Angle | 135 degrees horizontal to 109 degrees vertical |
| Audio Stream Codec | G 711, G 722 |
| Video stream Codec | H.263+, H.263, H.264 only for VoIP calls, MJPEG for http streaming |
| Interfaces | PoE 802.3af LAN connector |
| RFID Reader | RFID card reader 13.56 MHz and 125 kHz, connector for expansion module (RFID reader) |
| IN1 input terminal | Passive/Active mode (-30v to +30v DC) OFF = open contact or UIN > 1.5v ON = closed contact or UIN < 1.5v |
| Relay Output | 30v/1A AC/DC, output NO/NC |
| Active Switch Qutput | 8 ~ 12v DC depending on Power supply (PoE: 10 V; adapter: source voltage minus 2 V), max 400 mA |
| Input for external power supply | 12v/2A DC |
| Operating temperature | -40 to 55 degrees C |
| Operating relative humidity | 10% ~ 95% (non-condensing) |
| Ingress Protection | IP65, IK7 |
| Dimensions | 109(W) x 229(H) x 31(D)mm |
| Weight (Net) | 1.00kg |
| Weight (Gross) | 1.30kg |
