You are here: Audio > Accessible Toilet Alarms > Standard call point, button reset, with remote socket
Recently Viewed
.jpg)
C-TEC - NC802DB
Standard call point, button reset, with remote socket
List Price
£44.35
$0.00
€0.00
incl. VAT
Product Description
The NC802DB is an button-operated call/reset point capable of generating Standard calls on an 800 Series Call System. It includes a 6.35mm jack plug socket for connection of an optional tail call lead, pressure mat or other ancillary calling devices. When the red LED light up, this confirms a call has been made.
It features an onboard reset button, this cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas)
.
Mounts on a standard UK 25mm single gang flush or surface back box.Specification Sheet
- Click to download: NC802DB_Standard call point, button reset with remote socket_C-TEC_spec.pdf
| Description | NC802DB |
|---|---|
| Quiescent current | 0mA (none) |
| Alarm current | Determined by the type of control equipment and number / type of field devices connected to the system |
| Indicators | Red Reassurance LED (lit constant for Standard calls) |
| Controls | Call button (generates Standard calls only); Reset button (cancels Standard calls from the NC802DB and Standard calls from other devices wired on the same Zone) |
| Connections | SIG (Signal); -Ve (Negative); RC (for the optional connection of an NC807C ceiling pull unit |
| Expansion connections | Yes. For an optional NC807C ceiling pull unit |
| Onboard sounder | Yes. For optional tail call leads, floor pressure mats, air switches etc |
| Onboard Infrared Receiver | No |
| Dimensions | 87 W x 87 H x 32 D mm |
| Construction and finish | Plastic |
| IP Rating | IP20 |
| Operating temperature | -5ºC to +40ºC. Max. relative humidity 95% non-condensing |
| Weight (Gross) | 0.06kg |
