You are here: Audio > Audio Signal Processing > Audio Matrix > Analogue Audio Input Controller for use with NPX8000 Audio Matrix
Inter-M - NLM8000A
Analogue Audio Input Controller for use with NPX8000 Audio Matrix
Product Description
The NLM8000A Audio Input Faceplate must be used as part of the NPX System with the NPX8000 controller. This faceplate, unlike the NLM8000C, is not used for volume control but will allow use of a microphone or additional audio sources into the zone area in use by the Matrix.
The NLM8000A may be used with the NLM8000C for extra control in each zone area.
To be used with the NPX8000 Matrix.
The NLM8000A may be used with the NLM8000C for extra control in each zone area.
To be used with the NPX8000 Matrix.
Specification Sheet
- Click to download: npxsystem_spec.pdf
- Used in a single and expansion system
- Wall type local machine audio input
- 1 x XLR audio Input (MONO, GAIN control)
- Phantom Power support (control button, LED)
- 1 x RCA audio input (STEREO)
- Connected to NPX8000 via LM LINK IN terminal
- Connectable to NLM8000C LM LINK OUT terminal via daisy chain
| Description | NLM8000A |
|---|---|
| Input Sensitivity | Mic: -50dBu/2kΩ, Line: -10dBu/10kΩ |
| Output level | Normal: 0dBu |
| S/N @ Rated output (20kHz LPF) | Mic: >60dB, Line: >75dB |
| THD (20kHz LPF) | Mic: |
| Frequency Response (50Hz ~ 18kHz) | 0dBu ±3dB |
| Power Source | 40v DC |
| Power Consumption | 2W |
| Dimensions | 70(W) x 115(H) x 53(D)mm |
| Weight (Net) | 0.14kg |
| Weight (Gross) | 0.18kg |
