You are here: Audio > Microphones (Wired) > Boundary Microphones > Motorised Retractable Through Table Boundary Microphone, Nickel
Clockaudio - ARM202N-RF
Motorised Retractable Through Table Boundary Microphone, Nickel
List Price
£1,011.37
$1,316.80
€1,068.87
incl. VAT
Product Description
The Clockaudio ARM202N-RF is a stylish and customer-pleasing motorised through-desk robust brass microphone which elegantly rises from the desk/table at the touch of a button. Finished in Nickel.
This high quality, professional grade Cardioid Condenser Microphone is designed for high-profile boardrooms and conference suites where a standard through-desk microphone protruding from the desk/boardroom table is either inconvenient, or simply is aesthetically not acceptable.
At the touch of a button, the ARM202N-RF Retracta Cardioid Condenser Microphone smoothly and quietly rises from the boardroom table and becomes active; press the button again and the microphone drops back into it's seemingly flush (3mm protrusion on this model) position.
This motorised Retracta microphone also features Clockaudio's unique RF-immunity filter, which filters out any RF signals which may cause interference/noise on the audio system.
CASE STUDY:
This high quality, professional grade Cardioid Condenser Microphone is designed for high-profile boardrooms and conference suites where a standard through-desk microphone protruding from the desk/boardroom table is either inconvenient, or simply is aesthetically not acceptable.
At the touch of a button, the ARM202N-RF Retracta Cardioid Condenser Microphone smoothly and quietly rises from the boardroom table and becomes active; press the button again and the microphone drops back into it's seemingly flush (3mm protrusion on this model) position.
This motorised Retracta microphone also features Clockaudio's unique RF-immunity filter, which filters out any RF signals which may cause interference/noise on the audio system.
This product requires the Clockaudio ARM-C Control Module to operate.
For an alternate Black finish, please see the ARM202-RF.
CASE STUDY:
Specification Sheet
- Click to download: arm202rf-series_spec.pdf
- Easy to install
- Low profile at surface level
- Motorized low profile through table boundary layer microphone
- Robust brass construction
- Each capsule have a half cardioid pattern that are 180° from each other, and can capture two participants on both sides of a table
- Built in RF filter
- Balanced output
- Inbuilt Phantom Power Module
- Supplied with 2 x 2m (6.6ft) 2 core + screen cable
- Finish: Satin Nickel
- Also available in Nextel Suede Coating finishes (Custom Orders Only)
| Description | ARM202N-RF |
|---|---|
| Type | Condenser (back electret) |
| Polar Pattern | Cardioid |
| Frequency Response | 50Hz ~ 18kHz |
| Sensitivity | -37dB +/- 3dB @ 1kHz (0dB = 1v/Pa) |
| Impedance | 200 Ohms |
| S/N Ratio | 69dB(A) |
| Maximum Sound Pressure Level | 125dB at 1kHz 1% T.H.D. |
| Power Requirements | 9 ~ 48v phantom power |
| Termination | Audio: Open ended / Motor: RJ45 |
| Wiring connections | White & Black 2 core + screen Red Conductor Phase + White Conductor Phase - Screen Ground |
| Application | Designed for superior quality voice reproduction required in venues such as boardrooms,conferencing,court rooms and other such venues |
| Finish | Black Nextel |
| Dimensions | Hole cut-out: 58(⌀)mm x Surface height 3mm x Extended height 15mm x Surface diameter 63mm |
| Weight (Net) | 1.16kg |
| Weight (Gross) | 0.70kg |
