You are here: Audio > Microphones (Wired) > Boundary Microphones > Retractable Through-Desk Flush Cardioid Microphone, Nickel
Clockaudio - CRMF102N-RF
Retractable Through-Desk Flush Cardioid Microphone, Nickel
List Price
£385.69
$500.47
€406.24
incl. VAT
Product Description
The CRMF102N-RF Retractable Through-desk Microphone features Cardioid Boundary microphone, finished in Satin Nickel.
The CRMF102N-RF low profile boundary layer microphone is flush mounted to the surface of a board room table and is push-activated for up and down movement. The stylish microphone is ideally used for a versatile and instant environment with or without a microphone set-up.
The microphone used has been engineered in high quality brass for a robust solution and smooth retractable action when in use.
The CRMF102N-RF requires 9~48v phantom power supply for operation and features fitted filters to eliminate GSM frequencies from 800~1200MHz.
The microphone is connected via a 2m open-ended 2-core/screen cable and the microphone automatically switches on once pushed and extended for use and switches off when pushed to retract and store away.
Finished in Satin Nickel. For a Black Nextel model, please click on the CRMF102-RF.
Specification Sheet
- Click to download: CRM102RFseries_Boundary Retractable Microphone_spec.pdf
Manual
- Click to download: CRMF102RFseries_Retractable Boundary Microphone_schem.pdf
- Easy to install
- Low profile at surface level
- Unique ability to lock capsule away from sight when not in use
- Robust brass construction
- Cardioid polar pattern
- Built in RF filter
- Balanced output
- Inbuilt Phantom Power Module
- Supplied with 2m (6.6ft) 2 core + screen cable
- Finish: Satin Nickel
- Flush mount
| Description | CRMF102N-RF |
|---|---|
| Application | Designed for superior quality voice reproduction required in venues such as boardrooms, conferencing,court rooms and other such venues |
| Type | Condenser (back electret) |
| Polar Pattern | Cardioid |
| Frequency Response | 50Hz ~ 18kHz |
| Sensitivity | -37dB +/- 3dB @ 1 KHz (0dB = 1 V/Pa) |
| Impedance | 200 Ohms |
| S/N Ratio | 69dB(A) |
| Maximum Sound Pressure Level | 120db at 1KHz 1% T.H.D. |
| Power Requirements | 9 ~ 48v phantom power |
| Termination | Open ended |
| Wiring connections | Black 2 core + screen Red Conductor Phase + White Conductor Phase - Screen Ground Grey 2 core + screen/shield used for identification switch no polarity or power required screen not used |
| Finish | Satin Nickel |
| Mounting Type | Flush mount |
| Dimensions | Hole cut out diameter 30mm, Surface height 3mm, Extended height 15mm, Surface diameter 36mm |
| Weight (Net) | 0.39kg |
| Weight (Gross) | 0.60kg |
