You are here: Audio > Microphones (Wired) > Boundary Microphones > Retractable Thru Desk Omni Microphone with programmable RGB LED Touch Switch. Nickel
Clockaudio - CRM200SN-RFRGB
Retractable Thru Desk Omni Microphone with programmable RGB LED Touch Switch. Nickel
List Price
£682.27
$0.00
€0.00
incl. VAT
Product Description
The new Clockaudio CRM200SN-RFRGB is a low profile single element omni-directional boundary microphone which is retractable - i.e. it is sprung-loaded to 'pop-out' from its flush position in a desk or boardroom table when not in use.
The microphone is fitted with a RGB electronic capacitive touch sensitive switch designed to be used for remote switching. This means the LED light can be programmed to any colour within the RGB spectrum - for example to match corporate branding colours or the room environment.
Programmable RGB LEDs can be matched to any colour within the RGB spectrum:
This CRM200SN-RFRGB is ideal for a high-profile boardroom, courtroom and video conferencing environments.
This through-desk boundary microphone also features Clockaudio 'RF immunity' technology to filter out annoying noise / interruptions from GSM radio frequency-emitting devices such as smartphones, tablets, etc.
This high quality microphone also features integrated Phantom Power (taking it's power from the connected amplifier, negating the need for an additional power supply) and the device is engineered in high-grade brass with superior grade components.
The CRM200SN-RFRGB Model is finished in Nickel.
Specification Sheet
- Click to download: Clock Audio CRM200SRF_RGB_Spec.pdf
- RGB electronic capacitive touch switch facilitating click/ pop free switching.
- Programmable via a DSP to display up to seven colour combinations and operate in PTT, PTM or Latching modes.
- Works only in conjunction with supplied TS-C1 touch switch controller that accepts 6 way colour coded ribbon cable from RGB LEDs, a 2 way phoenix connector for connection to the reed switch &TS-OUT for connection to DSP via CAT-5 Ethernet cable.
- Omni - directional polar pattern microphone.
- Balanced output that is immune to RF artifacts.
- Fitted with a magnetic reed switch that prevents unwanted feedback while retracted; contact status available via TS - C1
- Power requirements 9 - 48V phantom power.
- Cable 2m 2 core + screen.
| Description | CRM200SN-RFRGB |
|---|---|
| Application | Designed for superior quality voice reproduction in venues such as boardrooms,conferencing,court rooms and other such venues. |
| Type | Condenser (Back Electret) |
| Polar Pattern | Omni-directional |
| Frequency Response | 50 Hz - 18 KHz |
| Sensitivity | -37.5 +/- 3dB @ 1KHz (0dB 1v/Pa) |
| Impedance | 200 Ohms |
| S/N Ratio | 68dBA |
| Maximum Sound Pressure Level | 125dB @ 1KHz 1%THD |
| Power Requirements | 9 - 48 volts Phantom Power |
| Termination | Open ended. Touch switch ribbon cable terminated with RJ45 |
| Dimensions | Microphone length below table: 112mm/4.4 ins, Above table when retracted: 2mm (0.08ins), when deployed: 15mm Body diameter: 56.5mm (2.2 ins). |
| Wiring Connections | 1 X White 2 core + screen, Red Conductor Phase + White Conductor Phase - Screen Ground. Grey 2 core + screen(not used) Used for identification switch no polarity or power required. |
| Weight (Net) | 0.40kg |
| Weight (Gross) | 0.60kg |
