You are here: Audio > Microphones (Wired) > Boundary Microphones > Retractable Thru Desk Triple Element Cardioid Microphone with RGB LED Touch Switch. Nickel
Clockaudio - CRM203SN-RFRGB
Retractable Thru Desk Triple Element Cardioid Microphone with RGB LED Touch Switch. Nickel
List Price
£820.15
$0.00
€0.00
incl. VAT
Product Description
The new Clockaudio CRM203SN-RFRGB is a through-desk Boundary Microphone which is retractable - i.e. it is sprung-loaded to 'pop-out' from its flush position in a desk or boardroom table when not in use.
The microphone is fitted with a RGB electronic capacitive touch sensitive switch designed to be used for remote switching. This means the LED light can be programmed to any colour within the RGB spectrum - for example to match corporate branding colours or the room environment.
Programmable RGB LEDs can be matched to any colour within the RGB spectrum:
Programmable RGB LEDs can be matched to any colour within the RGB spectrum:
This professional triple-element, boundary layer microphone is ideal for high-profile boardroom, courtroom and video conferencing environments.
This through-desk boundary microphone also features Clockaudio 'RF immunity' technology to filter out annoying noise / interruptions from GSM radio frequency-emitting devices such as smartphones, tablets, etc.
This high quality microphone also features integrated Phantom Power (taking it's power from the connected amplifier, negating the need for an additional power supply) and the device is engineered in high-grade brass with superior grade components.
The CRM203SN-RFRGBModel is finished in Nickel.
Specification Sheet
- Click to download: Clock Audio CRM203SRF_RGB_Spec.pdf
- Cardioid polar pattern.
- Balanced output that is immune to RF artifacts.
- Microphone fitted with a magnetic reed switch that prevents unwanted feedback while retracted; contact status available via TS-C1.
- Power requirements 9-48V phantom power.
- Cables 3 x 2m 2 core + screen.
- Switch works only in conjunction with supplied TS-C1 touch switch controller that accepts 6 way colour coded ribbon cable from RGB LEDs, a 2 way phoenix connector for connection to the reed switch &TS-OUT for connection to DSP via CAT-5 Ethernet cable
- Switch programmable via a DSP to display up to seven colour combinations and operate in PTT, PTM or Latching modes.
- RGB electronic capacitive touch switch facilitating click/ pop free switching.
- Finished in Nickel.
| Description | CRM203SN-RFRGB |
|---|---|
| Application | Designed for superior quality voice reproduction in venues such as boardrooms,conferencing,court rooms and other such venues. |
| Type | Condenser (Back Electret) |
| Polar Pattern | Cardioid |
| Frequency Response | 50Hz-18KHz |
| Sensitivity | -37 +/- 3dB @ 1KHz (0dB 1v/Pa) |
| Impedance | 200 Ohms |
| S/N Ratio | 69dBA |
| Maximum Sound Pressure Level | 125dB @ 1KHz 1%THD |
| Power Requirements | 9 - 48 volts Phantom Power |
| Termination | Audio: Open ended. Touch switch ribbon cable terminated with RJ45 |
| Dimensions | Microphone length below table: 112mm/4.4 ins, Above table when retracted: 2mm (0.08ins), when deployed: 15mm Body diameter: 56.5mm (2.2 ins). |
| Wiring Connections | 1 X White 2 core + screen and 2 X Black 2 core + screen Red Conductor Phase + White Conductor Phase - Screen Ground Grey 2 core + screen(not used) Used for identification switch no polarity or power required. |
| Weight (Net) | 0.40kg |
| Weight (Gross) | 0.60kg |
