i-ceilings - APL2
Dual Phono Line Level Plate
Login for Pricing
Product Description
The SigNET APL2 is an outreach Plate for AV inputs and is intended to be used for the connection of a laptop, CD, MP3 player (or similar audio signal) and should be located in a convenient position near to the teaching position.
The APL2 can be used with the i-ceilings amplified Sound Panel or IRX Wallmount Amplifier.
Outreach Plates are active with balanced outputs and, as such, can be daisy-chained together to provide multiple inputs as required, each with its own dedicated volume control. By this means it is possible to provide a flexible input structure to cater for almost any conceivable requirement.
All Outreach input and output plates require a single gang socket box with a minimum depth of 25mm.
- Can be connected to the balanced line level input of any audio system
- Fully cascadable - up to ten Outreach plates can be daisy-chained to one balanced line level input
- Plates can be located at any convenient point on an installation
- Standard two-pair cable is idealfor most applications
- Network lengths of 100 metres easily achievable with no degredation of sound quality
- Built-in pre-amp, mixer and level controls included on most variants
- Overcome the need for excessively long micorphone and audio leads
- Surface-mountable on 25mm UK single gang back boxes
- Effectively acts as a muliti-point distributed mixer with individual level controls
| Description | APL2 |
|---|---|
| Module | 1 Gang Plate |
| Input signal level | -12dBv ~ +6dBv |
| Gain | +6dB |
| Level Control | -30dBv to +6dB |
| Input impedance | >10kΩ |
| Phantom Volts | na |
| Signal to noise ratio | >92dB |
| THD + noise | |
| Supply Volts | 12 ~ 32v |
| Supply Current | 12 ~ 15mA |
| Input - balanced.unbalanced Line | 1v (0dBv) |
| Output - balanced line | 1v (0dBv) + 6dB (overload) |
| Frequency Response | 40Hz ~ 20kHz |
| Input impedance | >10kΩ |
| Output Impedance | |
| Insertion Signal to Noise Ratio | >95dB |
| Weight (Gross) | 0.10kg |
