SigNET - APL
Line Level Input Plate
List Price
£39.56
$40.70
€33.03
incl. VAT
Product Description
The SigNET APL is an outreach Plate for AV inputs and is intended to be used for the connection of a laptop, CD, MP3 player (or similar audio signal) and should be located in a convenient position near to the teaching position.
The APL can be used with the i-ceilings amplified Sound Panel or IRX Wallmount Amplifier
Outreach Plates are active with balanced outputs and, as such, can be daisy-chained together to provide multiple inputs as required, each with its own dedicated volume control. By this means it is possible to provide a flexible input structure to cater for almost any conceivable requirement.
All Outreach input and output plates require a single gang
socket box with a minimum depth of 25mm.
The APL can be used with the i-ceilings amplified Sound Panel or IRX Wallmount Amplifier
Outreach Plates are active with balanced outputs and, as such, can be daisy-chained together to provide multiple inputs as required, each with its own dedicated volume control. By this means it is possible to provide a flexible input structure to cater for almost any conceivable requirement.
All Outreach input and output plates require a single gang
socket box with a minimum depth of 25mm.
Specification Sheet
- Click to download: outreachplates_spec.pdf
- Can be connected to the balanced line level input of any audio system
- Fully cascadable - up to ten Outreach plates can be daisy-chained to one balanced line level input
- Plates can be located at any convenient point on an installation
- Standard two-pair cable is idealfor most applications
- Network lengths of 100 metres easily achievable with no degredation of sound quality
- Built-in pre-amp, mixer and level controls included on most variants
- Overcome the need for excessively long micorphone and audio leads
- Surface-mountable on 25mm UK single gang back boxes
- Effectively acts as a muliti-point distributed mixer with individual level controls
| Description | APL |
|---|---|
| Module | 1 Gang Plate |
| Input signal level | -12dBv ~ +6dBv |
| Gain | +6dB |
| Level Control | -30dBv to +6dB |
| Input impedance | >10kΩ |
| Phantom Volts | na |
| Signal to noise ratio | >92dB |
| THD + noise | |
| Supply Volts | 12 ~ 32v |
| Supply Current | 12 ~ 15mA |
| Input - balanced.unbalanced Line | 1v (0dBv) |
| Output - balanced line | 1v (0dBv) + 6dB (overload) |
| Frequency Response | 40Hz ~ 20kHz |
| Input impedance | >10kΩ |
| Output Impedance | |
| Insertion Signal to Noise Ratio | >95dB |
| Weight (Net) | 0.08kg |
| Weight (Gross) | 0.10kg |
