You are here: Door Intercom > IP Door Intercoms > Vandal Resistant IP Intercoms > Turbine IP Help Point Intercom Station, 2 call buttons, 10W speaker, IK08 rated
Zenitel - TCIS-C1
Turbine IP Help Point Intercom Station, 2 call buttons, 10W speaker, IK08 rated
Product Description
Zenitel TCIS-C1 vandal-resistant 'Help Point' door intercom with powerful 10W Class D amplifier. fetaures 'Emergency' and 'Info' call buttons. Finished in high-visibility yellow. IP66 & IK08 rated.
The Zenitel TCIS-C1 robust Intercom has extensive features including, high-definition voice quality, Active Noise Cancellation, a powerful 10W Class D amplifier, a MEMS microphone and the distinctive speaker grille design.
The TCIS-C1 is audio-only (no video camera) and features a single call button with digital display.
The Zenitel TCIS-C1 robust Intercom has extensive features including, high-definition voice quality, Active Noise Cancellation, a powerful 10W Class D amplifier, a MEMS microphone and the distinctive speaker grille design.
The TCIS-C1 is audio-only (no video camera) and features a single call button with digital display.
Manual
- Click to download: TCISC1_datasheet.pdf
- Help point intercom station
- Thermostatic front plate with two labelled call-buttons and braille
- Superior audio quality with advanced audio processing
- High sound pressure levels with automatic volume adjustment
- Dirt, dust and water resistant
- High impact protection rating
- ONVIF Compatible
- Supports wide set of IP and networking standards
| Description | TCIS-C1 |
|---|---|
| Internal speaker amplifier | 10 W class D |
| Microphone technology | Digital MEMS, omnidirectional microphone |
| Audio technology | Modes: Full open duplex, switched open duplex |
| Noise cancelling | Yes |
| Automatic Volume Control (AVC) / Acoustic Echo Cancellation (AEC) | Yes |
| Ethernet connector | 1 x RJ 45 |
| All other connectors | Tool less, spring loaded, vibration proof terminals |
| General inputs and outputs | 6 (configurable) |
| Outputs | 12mA as LED drivers |
| Change-over relay (NO+NC+COM) | SELV |
| Power options | PoE or 24v DC external power supply |
| PoE (power over Ethernet) | IEEE 802.3af standard |
| Power consumption | Idle 1.8W, max 12W (depending on volume) |
| IP rating | IP66 (applies when mounted in TA-1 back-box) |
| IK rating | IK08 |
| Operating temperature range | -40° to 70° C |
| Dimensions | 180(H) x 120(W) x 73(D) mm |
| Weight (Net) | 0.80kg |
| Weight (Gross) | 0.90kg |
