CS1SN-RFRGB - 1 Element Boundary Layer Microphone with programmable RGB LED Touch Switch. Nickel
Click on images to enlarge
CS1SN-RFRGB - 1 Element Boundary Layer Microphone with programmable RGB LED Touch Switch. Nickel
CS1SN-RFRGB - 1 Element Boundary Layer Microphone with programmable RGB LED Touch Switch. Nickel
CS1SN-RFRGB - 1 Element Boundary Layer Microphone with programmable RGB LED Touch Switch. Nickel
Recently Viewed
cie group -
List Price £459.82 incl. VAT
Clockaudio - CS1SN-RFRGB

1 Element Boundary Layer Microphone with programmable RGB LED Touch Switch. Nickel

RF Immunity
List Price
£459.82
$0.00
€0.00
incl. VAT
Show prices in GBP
Show prices in USD
Show prices in EUR

Product Description

 The Clockaudio CS1SN-RFRGB is a Consultant Boundary Series microphone with inbuilt RGB electronic capacitive touch sensitive switch designed to be used for remote switching. This means the LED light can be programmed to any RGB colour for example to match corporate branding colours.

Programmable RGB LEDs can be matched to any colour within the RGB spectrum:


The CS1SN-RFRGB was designed to minimise the number of Microphones on the conference table whilst maintaining high performance and ease of installation.
 
Finished in Nickel.

Specification Sheet

  • RGB electronic capacitive touch switch facilitating click/pop free switching.
  • Programmable via a DSP to display up to seven colour combinations and operate in PTT, PTM or Latching modes.
  • Works only in conjunction with supplied TS-C1 touch switch controller that accepts 6 way colour coded ribbon cable from RGB LEDs, a 2 way phoenix connector for connection to the reed switch and TS-OUT for connection to DSP via CAT-5 Ethernet cable.
  • Half cardioid polar pattern.
  • Balanced output that is immune to RF artifacts.
  • Power requirements 9 - 48V phantom power.
  • Cable 2m 2 core + screen.
Description CS1SN-RFRGB
Application Boundary Layer Microphone with a Half Cardioid Polar Pattern. Designed to be placed in the middle of the conference table, with the participants facing the condenser element. Inbuilt Phantom Power Module.
Type Condenser (back electret).
Polar Pattern Half Cardioid.
Frequency Response 50 Hz - 18 KHz.
Sensitivity -37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa).
Impedance 200 Ohms.
S/N Ratio 69dB (A).
Maximum Sound Pressure Level 120dB 1% THD.
Power Requirements 9 - 48 volts Phantom Power.
Termination Open ended for audio RJ 45 for switching.
Dimensions 44mm (1.7inches) x 22mm (.87inches)
Weight (Net) 0.48kg
Weight (Gross) 0.70kg
Accreditations
  • UVDB Registered
  • PLASA Member
  • Member of BESA
  • BSI 9001
  • ISCE supporting member