You are here: Audio > Microphones (Wired) > Boundary Microphones > 2 Element Boundary Layer Microphone with programmable RGB LED Touch Switch. Nickel
Clockaudio - CS2SN-RFRGB
2 Element Boundary Layer Microphone with programmable RGB LED Touch Switch. Nickel
List Price
£667.95
$0.00
€0.00
incl. VAT
Product Description
The Clockaudio CS2SN-RFRGB is a dual element Boundary Series microphone with a half cardioid polar pattern. The microphone is fitted with an RGB electronic capacitive touch sensitive switch. This means the LED light can be programmed to any RGB colour for example to match corporate branding colours.
The CS2SN-RFRGB was developed to minimise the number of Microphones on the conference table whilst maintaining high performance and ease of installation.
For a large boardroom table, multiple CS2SN-RFRGB microphones would be equally positioned along the table for pick-up of more people.
The CS2SN-RFRGB is supplied fitted with a 2 metre cable (with open-ended termination) and 4 integral Phantom Power adapters which accept 9 to 48 volts DC.
This professional Boundary Microphone also includes RF immunity filters which eliminate the unwanted noise and interference caused by the GSM frequencies emitted by handheld / wireless devices such as smartphones.
The CS2SN-RFRGB was developed to minimise the number of Microphones on the conference table whilst maintaining high performance and ease of installation.
Programmable RGB LEDs can be matched to any colour within the RGB spectrum:
The CS2SN-RFRGB is supplied fitted with a 2 metre cable (with open-ended termination) and 4 integral Phantom Power adapters which accept 9 to 48 volts DC.
This professional Boundary Microphone also includes RF immunity filters which eliminate the unwanted noise and interference caused by the GSM frequencies emitted by handheld / wireless devices such as smartphones.
Specification Sheet
- Click to download: Clock Audio CS2S_RF_RGB_Spec.pdf
- RGB electronic capacitive touch switch facilitating click/pop free switching.
- Programmable via a DSP to display up to seven colour combinations and operate in PTT, PTM or Latching modes.
- Works only in conjunction with supplied TS-C1 touch switch controller that accepts 6 way colour coded ribbon cable from RGB LEDs, a 2 way phoenix connector for connection to the reed switch and TS-OUT for connection to DSP via CAT-5 Ethernet cable.
- Half cardioid polar pattern.
- Balanced output that is immune to RF artifacts.
- Power requirements 9 - 48V phantom power.
- Cable 2m 4 core + screen.
| Description | CS2SN-RFRGB |
|---|---|
| Application | Boundary Layer Microphone with a Half Cardioid Polar Pattern. Designed to be placed in the middle of the conference table, with the participants facing the condenser element. Inbuilt Phantom Power Module. |
| Type | Condenser (back electret). |
| Polar Pattern | Half Cardioid. |
| Frequency Response | 50Hz-18KHz |
| Sensitivity | -37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa). |
| Impedance | 200 Ohms. |
| S/N Ratio | 69dB (A). |
| Maximum Sound Pressure Level | 120dB 1% THD. |
| Power Requirements | 9 - 48 volts Phantom Power. |
| Termination | Open ended for audio RJ 45 for switching. |
| Dimensions | 104mm (4.1inches) x 44mm (1.7inches) x 22mm (.87inches). |
| Weight (Net) | 0.58kg |
| Weight (Gross) | 0.80kg |
