You are here: Audio > Accessible Toilet Alarms
Accessible Toilet Alarms
UK's best-sellling range of Disabled Persons Toilet Alarm kits, call points and infrared devices.
| Compare up to 4 items: |  |
2 | 3 | 4 | Compare |
Part Number: NC302RXC
C-TEC - Infrared master ceiling receiver, no on-board reset, no remote socket
A ceiling-mountable infrared receiver that accepts Standard & Emergency calls from compatible 800 Series infrared transmitters.
The NC302RXC is a ceiling-mountable infrared receiver that will accept Standard & Emergency calls from compatible 800 Series infrared transmitters. It can also receive uninterrupted infrared signa...
Part Number: NC302RXCS
C-TEC - Infrared secondary ceiling receiver, up to 3 per master
A ceiling-mountable secondary infrared receiver designed to extend the coverage of 800 Series master infrared receivers.
The NC302RXCS is a ceiling-mountable secondary infrared receiver specifically designed to extend the coverage of 800 Series master infrared receivers.
You can use up to a maximum of three NC3...
Part Number: NC802DB
C-TEC - Standard call point, button reset, with remote socket
A button-operated call/reset point - capable of generating Standard calls on an 800 Series Call System.
The NC802DB is an button-operated call/reset point capable of generating Standard calls on an 800 Series Call System. It includes a 6.35mm jack plug socket for connection of an optional tail call...
Part Number: NC802DEB-1/2
C-TEC - Emergency call point, button reset, with remote socket, can make std and emcy calls
A button-operated call/reset point capable of generating both Standard and Emergency calls on 800 Series Call Systems.
The NC802DEB-1/2 is a button-operated call/reset point capable of generating Standard and Emergency calls on an 800 Series Call System. It includes a 6.35mm jack plug socket where you can conne...
Part Number: NC802DERB
C-TEC - Infrared call point, button reset, with remote socket
A button operated call/reset point c/w infrared receiver capable of generating both Standard and Emergency calls on an 800 Series Call Systems.
The NC802DERB is a button operated call/reset point c/w infrared receiver capable of generating Standard and Emergency calls on an 800 Series Call System. The onboard infrared receiver will accep...
Part Number: NC802DEWM
C-TEC - Water resistant alert point, IP65, mag. reset, can make std or emgy calls (not both)
A surface-mounting IP65 rated water-resistant alert point with the capabilities of generating Standard or Emergency calls using an 800 Series Call System.
The NC802DEWM is a surface-mounting IP65 rated water-resistant alert point that is capable of generating Standard or Emergency calls on an 800 Series Call System. It has a light grey back box, yell...
Part Number: NC806CS
C-TEC - Overdoor light and sounder
Provides an audible and visual indication of 800 Series Alarm calls outside of bedrooms, WCs and other areas fitted with an 800 Series calling device.
The NC806CS provides audible and visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other areas that are fitted with an 800 Series calling device.
It indicates Standar...
Part Number: NC951
C-TEC - Accessible Toilet Alarm Kit
The UK's market-leading Disabled Persons Toilet Alarm kit.
Includes everything required for a BS8300 clause compliant emergency assistance alarm.
The NC951 is the UK's market-leading Disabled Persons Toilet Alarm kit. It includes everything required for a BS8300 clause compliant emergency assistance alarm.
It is attractively designed, e...
.jpg "Four zone call controller c/w mute/reset button, requires 12V PSU")
Part Number: NC944
C-TEC - Four zone call controller c/w mute/reset button, requires 12V PSU
A four zone call controller c/w mute and reset buttons.
The NC944 is an attractively-designed four zone call controller c/w mute and reset buttons. It is fully compatible with the C-TEC entire range of 800 Series Call System components.
It is capab...
Part Number: NC943B
C-TEC - Single zone call controller c/w PSU, accept button, relay and on-board rechargeable battery
A single zone call controller with a 12V 140mA PSU and standby battery.
The NC943B is a single zone call controller that has a 12V 140mA PSU and standby battery. It is compatible with the C-TEC entire range of 800 Series Call System components.
It is capable of...
Part Number: NC930
C-TEC - 12V 250mA PSU, powers up to 2 x four zone call controllers
A compact 12V 250mA double gang power supply unit.
The NC930 is a compact 12V 250mA double gang power supply unit. It can provide power to up two NC944 Four Zone Call Controllers. And is suitable for use in many other applications.
It has a gr...
.jpg "20 Zone Master Call Controller, flush, c/w 12V 300mA PSU, relay, reset and mute/call buttons")
Part Number: NC920F
C-TEC - 20 Zone Master Call Controller, flush, c/w 12V 300mA PSU, relay, reset and mute/call buttons
Compatible with the C-TEC entire range of 800 Series devices.
The NC920F is compatible with C-TEC’s entire range of 800 Series field devices.
Housed in flush mounting plastic enclosure the NC920F measures at just 214mm x 178mm. It has two call levels...
.jpg "10 Zone Master Call Controller, flush, c/w 12V 300mA PSU, relay, reset and mute/call buttons")
Part Number: NC910F
C-TEC - 10 Zone Master Call Controller, flush, c/w 12V 300mA PSU, relay, reset and mute/call buttons
10 Zone Master Call Controller compatible with the whole C-TEC 800 series range.
The NC910F is compatible with the C-TEC entire range of 800 Series field devices. It is housed in an attractive flush mounting plastic enclosure which measures at 214mm x 178mm.
There are two...
Part Number: NC920EF
C-TEC - 20 Zone Expansion Unit for NC910F or NC920F
Expands the number of zones on an NC920F Call Controller by 20 zones
The NC920EF expands the number of zones on an NC920F Call Controller by 20 zones. Housed in the attractive surface mounting plastic enclosure, it measures at just 214mm x 178mm.
It includes...
Part Number: NC910EF
C-TEC - 10 Zone Expansion Unit for NC910F or NC920F
Expands the number of zones on an NC910F Call Controller by 10 zones.
The NC910EF expands the number of zones on an NC910F Call Controller by 10 zones. Housed in the attractive surface mounting plastic enclosure, it measures at just 214mm x 178mm.
It includes...
Part Number: NC894DKB
C-TEC - Isolatable monitoring point, button reset, no remote socket
A keyswitch-isolatable monitoring point comes with magnetic door contacts for use with C-TEC's 800 Series Call System.
The NC89DKB is a keyswitch-isolatable monitoring point with magnetic door contacts for use with C-TEC's 800 Series Call System. It can be used to monitor any device with a normally open or normally...
Part Number: NC807C
C-TEC - Ceiling pull unit, no on-board reset, no remote socket
Pull the string to generate a standard call on an 800 Series Conventional Call System.
The NC807C can be used to generate a standard call on an 800 Series Conventional Call System. It is typically wired as a secondary to an 800 Series Call Point or Reset Point so that its calls can b...
